Most screens have a thin coating that cuts glare or resists fingerprints. The wrong cleaner can strip it for good, so gentle is always better.
The good news is that a dry microfiber cloth handles most dust and smudges on its own.
What you need
- Two clean microfiber cloths, one dry and one for damp cleaning.
- Distilled water, which leaves fewer spots than tap water.
- Optional: a cleaner your screen's maker approves, or a 70% isopropyl alcohol wipe if the maker allows it.
Spot every streak first
Open a black screen under normal room light. Smudges, fingerprints and streaks show up clearly against the dark glass.
Then open a white screen. Specks of dust and dried spots stand out against bright white.
How to clean a monitor or laptop screen
- Turn the screen off and unplug it. A cool, dark screen is safer and shows the dirt better.
- Wipe gently with the dry cloth in one direction. Do not press, since pressure can damage an LCD panel.
- For stubborn marks, lightly dampen the second cloth with distilled water. It should feel barely damp, never wet.
- Wipe the marks, then go over the screen with the dry cloth.
- Let it dry fully before you turn it back on, then check again on the black and white screens.
On a laptop, also wipe the keyboard. Skin oil on the keys transfers to the screen every time you close the lid.
Phones and tablets
Most phones have a fingerprint resistant coating. Turn the phone off and wipe it with a dry microfiber cloth, which removes most marks.
Some phone makers allow a 70% isopropyl alcohol wipe for occasional cleaning. Check your maker's guidance first, and keep moisture away from the ports and speakers.
TVs
Turn the TV off and let it cool. Use a large dry microfiber cloth and light, sweeping strokes.
Never spray anything onto a TV. Liquid can run down the screen and seep into the frame.
What never to use
| Avoid | Why |
|---|---|
| Window or glass cleaner | Ammonia and similar chemicals can strip anti glare and fingerprint coatings. |
| Paper towels and tissues | Wood fibers are rough enough to leave fine scratches and lint. |
| Spraying the screen directly | Liquid runs to the edges and can get inside the panel. |
| Bleach, acetone or strong solvents | They can cloud or damage the surface permanently. |
| Pressing hard or scrubbing | Pressure can damage LCD pixels and leave marks. |
Matte and glossy screens
Matte, anti glare screens have a textured coating that scuffs more easily. Use only a dry cloth when you can, and the lightest touch when you cannot.
Glossy screens show every fingerprint but are a little more forgiving. Some premium screens have special etched glass that should only be cleaned with the cloth that came in the box.
How often to clean
Clean whenever you notice dust or smudges. A quick dry wipe once a week keeps most screens clear, so deep cleans are rarely needed.